Campbell Scientific CSBUOY-NS Buoy System - Manual (Page 20)

Section 5. Maintenance
5-2
Each month
• Check humidity indicator card (or humidity readings from sensor).
Replace desiccant pack and tighten Heyco pressure fittings if needed.
Each Year
• Check cable for rodent or environmental damage.
• Replace humidity indicator card if necessary.
Every Three to Five Years
• Replace 10162 Humidity Sensor (if being used).
General Maintenance
• An occasional cleaning of the glass on the solar panel will improve its
efficiency.
• Check sensor leads and cables for cracking, deterioration, and rodent
damage.
• Check the CSBUOY-NS float, instrument housing, instrument shroud, and
cap for structural damage, poor fittings, loose fittings.