Campbell Scientific CS100 Barometric Pressure Sensor - Manual (Page 14)

CS100 Barometric Pressure Sensor
7. Installation
7.1 Enclosure Considerations
To prevent condensation, install the sensor in an environmentally protected
enclosure, complete with desiccant, which should be changed at regular
intervals.
Failure to protect the sensor from condensation may result
in permanent damage. CAUTION
The CS100 is typically mounted in a Campbell Scientific enclosure next to the
datalogger. Campbell Scientific also offers the ENC100 for situations where it
is desirable to house the CS100 in its own enclosure. The ENC100 is a 6.7-in.
x 5.5-in. x 3.7-in. enclosure that includes a compression fitting for cable entry,
a vent for equalization with the atmosphere, a backplate for mounting the
CS100, and hardware for mounting the ENC100 to a tripod, tower, or pole (see
FIGURE 7-1).
FIGURE 7-1. ENC100 is a very small enclosure that can house one
CS100
8