Chatsworth Products F-Series TeraFrame® HD - Manual (Page 6)

Chatsworth Products Inc. Installation Guide TeraFrame HD 08/27/10
Chatsworth Products Inc. Version 1
CAUTION:
• The engineered shock pallet is designed to only be used only once.
The pallet should not be reused after the cabinet reaches its
destination.
• Reusing a shock pallet may not protect the cabinet and installed
equipment. If a cabinet with installed equipment needs to be shipped to
a new destination, a new shock pallet must be used.
Moving cabinets with casters
CAUTION:
• Cabinets with casters should be moved with care.
• Sudden stops, excessive force, and uneven surfaces may cause the
product to overturn.
• When rolling the cabinet, make sure to push firmly on the door frame
and not the door mesh.
• Never push on the sides of the cabinet, which could cause the cabinet
to overturn.
• Customer is responsible for assuring that floor surface is free of
obstructions and other obstacles that would impede safe movement of
the cabinet. Concentrated, ultimate and rolling load floor loading
capacities must be carefully observed. All ramps and thresholds must
be safely and properly addressed.
Installation of cabinet
• Cabinet must be securely anchored to the floor in its service location.
• Brackets used to anchor the cabinet to the pallet have been designed to be utilized to
anchor the cabinet to the floor in its service location.
• Customer is responsible for assuring that flooring meets the performance requirements
as established by CISCA (Ceiling & Interior Systems Construction Association) including
concentrated, ultimate and rolling load capacity.