Chatsworth Products F-Series TeraFrame® HD - Manual (Page 4)

Chatsworth Products Inc. Installation Guide TeraFrame HD 08/27/10
Chatsworth Products Inc. Version 1
Recyclable materials
CPI uses only recyclable materials in all of its cabinet packaging. Please save packaging for
later use or dispose of properly. All wood components of CPI pallets have been properly treated
to comply with the pest-free certifications required by foreign countries.
Please Inspect for Shipping Damage before the carrier leaves your premise:
Each TeraFrame cabinet leaves our plant in perfect condition. Any visible or concealed damage
most likely occurred in handling after it left our plant and should be reported at once to the
shipping company which delivered your cabinet
Intended Use
Keep a printed copy of the Preface of this User’s Manual in or near the cabinet.
• Install the cabinet only in a restricted service environment, such as a data center. Use
indoors only, in environmentally controlled areas; do not use outdoors, in harsh
environments, or in air-handling spaces.
• Use the cabinet for information technology and telecommunications equipment, including
servers and peripherals.
• Allow only qualified service personnel to use the cabinet.
• The cabinets must be anchored to the floor to ensure stability.
• The load-bearing capacity of the TeraFrame HD cabinet is:
600 mm wide cabinet supports 3,000 lb (1364 kg)
• The ambient temperature operating range for the TeraFrame cabinet and installed
cabinet accessories is 32° to 140°F (0° to 60°C). Cabinet installation to be conducted by
qualified service personnel and in accordance with applicable national codes.
Unpacking Procedure
This section describes the system unpacking procedure.
WARNING: Handling wooden parts such as the pallet can cause splinters.
Wear gloves when handling the pallets.