Step #1 remove the face of the console – Audiovox K-9 User Manual

Page 3

Text mode
Original mode

P/N 8007132

Page 3 of 10

Rev. B

There are six (6) steps to install the K-9 TV/VCP floor console:

Step # 1 Remove face of the console
Step # 2 Install brackets and the straps
Step # 3 Install console to the floor of the vehicle
Step # 4 Install VCP
Step # 5 Install TV
Step # 6 Replace console face

STEP #1 REMOVE THE FACE OF THE CONSOLE

⇒

Remove 4 Phillips screws securing face of console to body of console.

⇒

Set screws and face aside. Take care that screws do not get lost.

1) Disassemble shroud.