Kinivo BTX450 Wireless Bluetooth Speaker EN - Manual (Page 10)

BTX450 Kinivo Wireless Bluetooth Speaker 10
the speaker in pairing mode and pair with the new device. If the speaker has
been paired with both devices already, then simply disconnect the speaker
from the first device by going to the first device’s bluetooth configuration (you
might have to disable its bluetooth temporarily). Now open the bluetooth
configuration of the second device and “connect” to the speaker.
For example,while going from iPhone to a computer.
1. Disconnect the speaker from iPhone’s Bluetooth configuration. You may
want to disable iPhone’s Bluetooth to achieve this.
2. Now go to your computer’s” Show Bluetooth devices” and click on connect.
5. How can I tell when the battery is low?
When the battery is low, the red LED will blink slowly while the speaker is
unplugged.
6. How can I tell when the battery is charging and is fully
charged?
The BTX450 speaker automatically charges itself when its plugged into the
AC outlet. The power LED will blink (fast) during charging. The LED will stop
blinking when the speaker is fully charged.
7. Help! I’m unable to use to the speaker. What should I
do?
Please view the Troubleshooting section. If you are unable to find a solution you
can contact Kinivo Support via email at [email protected].