Samlex America BP-1210 - Manual (Page 3)

1. Important Safety Information
WARNING!
Before installing or using BP- A Battery Charger,
you need to read following safety information carefully.
1-1. General Safety Precautions
1-1-1. Do not expose BP-□□□□A Battery Charger to water, mist, snow,
or dust. To reduce the risk of fire, do not cover or obstruct the
ventilation shaft.
Do not install BP-□□□□A Battery Charger in a zero-clearance
Compartment. Overheating may occur.
1-1-2.To avoid the risk of fire and electronic shock, make sure that existing
wiring is in good electrical condition and not undersize.
Do not operate BP-□□□□A Battery Charger with damaged or
substandard wiring.
1-1-3.Do not charge non-rechargeable batteries.
1-1-4.Do not charge batteries in a non-ventilated enclosures.
1-1-5.Only the wire with IEC socket is allowed to plug to the battery charger.
1-1-6.If the power supply cord is damaged, it must be replaced by the
manufacturer, the service agent, or a related qualified person in case
of a hazard.
1