Accusplit 980-312 - Manual (Page 4)

12
• To stop the recall of the stored data, press “A”, “B”, or “D”. The
measurements when the stopwatch was stopped will be shown.
Then, press “B” to reset the digits to “00”.
• The time stored in the memory can be recalled even while the stopwatch
is
measuring.
• To measure the lap time and split time while the stored
data are being recalled operate the buttons as follows.
Press “B” to measure new lap time and split time.
Press “A” to stop the measurement.
Press “D” to return to the measurement mode.
With each press of “C”
When the stopwatch is stopped Split time and lap time are recalled
starting with the fi rst ones.
When the stopwatch is measuring The times are recalled starting with
the last ones.
B A
13
Notes:
1. Even if the digits are reset to “00”, stored times are not erased and
can be recalled by pressing “C” unless new measurement is started.
2. If the stopwatch is left untouched with the recalled times shown, the display
will automatically return the STOPWATCH display in 1 to 20 minutes.
14
NO-PROOF-OF-PURCHASE LIMITED WARRANTY
See label on back of unit for details, or check
http://support.ACCUSPLIT.com
REGISTER NOW Please return
your AX602R Registration to the
Repair Center address in the
warranty, and we will let you
know about future products.
Email (preferred)
User
15