Flytec 4005 * - Manual (Page 12)

23 Operating Instructions FLYTEC 4005
Time measurement and temperature display option mode
The temperature display can be switched on or off at the first level of option mode. If it is swit-
ched on, the TEMP indicator will flash as well as a TIME indicator. When the temperature dis-
play is switched off, only the TIME indicator is on.
The unit of the temperature display (° Celsius or ° Fahrenheit) can be selected at the second
level using the key and the key.
Logbook
General remarks
The maximum values of the current flight and those of the previous 19 flights are saved in
memory and can be invoked in the MEMO display . You can access the MEMO display by
repeatedly pressing the key until the MEMO indicator appears.
The maximum values saved are:
• Maximum absolute altitude ALT 1
• Maximum relative altitude ALT 2
• Maximum ascent and descent VARIO bar display
• Flying time CHRONO
• Date Lower display
The key and the key are used to display the flight required; flight 0 is the current
flight, the peak values of which are continuously updated. Flight 19 is the least recent flight
and is deleted whenever a new flight is saved to memory.
A flight is saved to memory automatically when the instrument is switched off. (Condition:
the instrument has been switched on for at least 3 minutes and a difference in altitude of at
least 50 meters has been attained.)
Logbook setting mode
All flights in the logbook can be deleted in setting
mode. Cl appears in the MEMO display. The log-
book memory is deleted by pressing the key
for 4 seconds. As soon as the memory has been
deleted, all the segments of the display will flash
briefly and the instrument starts up again.
TIME
SPEED
MEMO
Mode SET
Clear MEMO (ALT 4sec.)
MEMO
MEMO
MEMO 4 Sec.
START - STOP
RESET
CLEAR ALT 2
START - STOP
RESET
CLEAR ALT 2