AT&T 2455 - Manual (Page 20)

Handset to Handset
1 Press
I on the handset.
2 Press the number of the handset you
are calling (for example, press
2 for
Handset 2)
— OR —
Use the softkeys to scroll to the
handset you are calling, then select
OK.
3 The responding handset presses
I to answer your
signal.
4 To end the intercom connection, press
O on either handset.
Handset to All Handsets
1 Press
I on the handset.
2 Press
* on the handset
— OR —
Use the softkey to select
OK when GLOBAL PAGE is highlighted.
All registered handsets will ring.
3 Respond at any handset by pressing
I.
4 To end the intercom connection, press
O on the handset.
Transfer Calls
You can transfer calls from handset to handset. A transfer that remains
unanswered for five minutes rings back to the sending handset for
30 seconds, then disconnects.
Blind Transfer
Transfer without advising the other person.
1 Press
I.
2 Enter the handset number (
1, 2, 3, 4) where you want to
transfer the call
— OR —
Use the softkeys to scroll to the handset where you want to
transfer the call, then select
OK.
3 The call is transferred when the responding handset presses
I, P, or k.
INTERCOM/TRANSFER OPERATION
18
12
GLOBAL PAGE
HANDSET 1
OK