t&mSystems Project PageMic8 - Manual (Page 9)

5. CONNECTION AND SETTING
5.1 Onnection between the remote paging console and the extension keypad: The IDE
communication cable is used to provide connection between the remote paging console and the
extension keypad and between two extension keypads
5.3 Extension keypad dipswitch setting: There are 4 address codes on both remote paging
console and extension keypad, which are used to identify itself.
Notice:
1. Only one address code swtich of each dipswitch shall be placed down position , otherwise the
system maybe will out of work.
2. Any of the dipswitches shall be set of different addresses, otherwise the system maybe will out of
work.
Connection through
10P IDE cable
Extension keypad Remote paging Console
Extension keypad 1 Extension keypad 2 Extension keypad 3
9