t&mSystems Project PageMic8 - Manual (Page 6)

3. FRONT AND REAR PANEL
FRONT PANEL
1. GOOSENECK MICROPHONE
2. POWER INDICATOR The LED will be light on blue when power switch is placed at on position,
which will be extinguished when power switch is placed at off position.
3. OUTPUT LEVEL METER 5 position LED output level meter to display the output status, green,
green, green, amber to red.
4. TALK INDICATOR The LED will be light on blue when talk button is pushed, which will be
extinguished when talk button is pushed back.
5. TALK BUTTON After zone selection, announcement could be started when the talk button is
pushed and indicator illuminated. Without zone selection, announcement could not be started even
the talk button is pushed, this improper operation will come with phenomena of that the talk
indicator will be fast-flash extinguished.
6. ALL CALL BUTTON Push the all call button to select all zones. The all call indicator will be
extinguished when all call button is pushed while some zone is already been taken, in this case the
busy zone indicator will be fast flash to amber while the available zone indicator will be illuminated
on blue. All zone indicators will be illuminated on blue when all of the zones are available for paging.
Push back on the all call button to terminate the all zone paging, and the all call indicator will be
extinguished as fellow.
7. ALL CALL INDICATOR the LED will be light on blue when all call button is pushed, which will be
extinguished when the all call button is pushed back.
8. ZONE LABEL The zone label is design to insert customer printed zone guidance. Eight blank
labels will be supplied with each paging console. It is designed of length 20mm, width 6mm and
distance between 2 label's centers 9mm.
1
2
3
4
5
6
7 8 910
6