Siemens VSQ5X12M1 - Manual (Page 30)

29
en
We are delighted that you have chosen to purchase a
Siemens vacuum cleaner from the Q5.0 model series
A variety of Q5.0 models are shown in this instruction
manual. It is therefore possible that not all of the
appliance features and functions described match your
model. You should only use original accessories from
Siemens that were specially developed for your vacuum
cleaner, so that you achieve the best possible
vacuuming results.
Fold out the picture pages.
Your vacuum cleaner
1 Adjustable floor tool with locking collar*
2 Hard-floor brush with locking collar*
3 TURBO-UNIVERSAL® brush for floors*
4 Telescopic tube with adjusting sleeve
(and locking collar)*
5 Telescopic tube with sliding switch
(and locking collar)*
6 Handle
7 Flexible hose*
8 Upholstery nozzle*
9 Crevice nozzle*
10 Exhaust grille
11 Dust bag change indicator*
12 Electronic power controller
13 On/off button
14 Parking aid
15 Power cord
16 Carrying handle
17 Dust bag compartment lid
18 Accessories compartment
19 Storage aid (on underside of appliance)
20 Dust bag
21 Motor protection filter*
22 Exhaust filter
Replacement parts and special
accessories
A Replacement filter pack
Filter TYPE GXXL (VZ41FGXXL)
For best performance GXXLplus (VZ41GXXLP2)
Contents: 4 filter bags with seal
1 micro-hygiene filter
http://www.dust-bag-siemens.com
B TURBO-UNIVERSAL® brush for upholstery VZ46001
All-in-one brushing and vacuuming of upholstered
furniture, mattresses, car seats, etc. Especially sui-
table for picking up pet hair. The brush roller is dri-
ven by the suction air flow of the vacuum cleaner.
No separate electrical connection is needed.
C TURBO-UNIVERSAL® brush for floors VZ102TBB
All-in-one brushing and vacuuming of short-pile rugs
and carpets, and for all floor coverings. Especially
suitable for picking up pet hair. The brush roller is
driven by the air flow through the vacuum cleaner.
No separate electrical connection is needed.
D Hard-floor tool VZ123HD
For vacuuming hard floors
(parquet, tiles, terracotta, etc.)
Before using for the first time
Figure
● Push the handle onto the flexible hose and lock it in
place.
Figure
● Open the accessories compartment.
● Insert the crevice nozzle and upholstery nozzle in the
accessories compartment in the appliance lid.
● Close the accessories compartment.
Initial use
Figure
a) Push the flexible hose adapter into the air intake
opening in the vacuum cleaner lid until it locks into
place.
b)To remove the flexible hose, press the two catches
together and pull out the hose.
Figure
● Push the handle into the telescopic tube until it
locks in place.
● To release the connection, press the locking collar
and pull out the telescopic tube.
Figure
● Push the telescopic tube into the connecting piece
on the floor tool until it locks in place.
● To release the connection, press the locking collar
and pull out the telescopic tube.
Figure
● Move the sliding sleeve in the direction of the arrow
to release the telescopic tube and adjust it to the
length required.
Figure
● Holding the power cord by the plug, pull out to the
required length and insert the plug into the mains
socket.
1
2
3
4
5
6*
7
*depending on model
GA 8001 000 433_VSQ5_VSQ5 10.01.2014 10:08 Seite 29