Menu settings – Siemens TE806501DE User Manual
Page 43
39
en
Menu settings
● Hold down the
j
button
7 for at least
3 seconds.
The different setting options are now
displayed.
Settings
Coffee temp.
Hot water temp.
<85°C
Exit profile
The different setting options can be selected
with the selection buttons
<
and
>
4.
Note: The changes you have made are
saved automatically. It is not necessary
to confirm them additionally. If no entry is
made after approx. 2 minutes, the menu will
close automatically.
The following settings can be selected:
Language
● Turn the rotary knob
6 to select the
required language.
Coffee temp.
● Turn the rotary knob
6 to set the coffee
temperature. The setting applies to all
types of preparation, except the custom-
ised settings under “Customising”.
Hot water temp.
● Turn the rotary knob
6 to set the tem-
perature. The setting applies to all types
of preparation except the customised
settings under “Customising”.
Exit profile
● Here you can set whether the appliance
should exit the customising function
automatically
automatic
or manually
manually
.
Auto off after
● Turn the rotary knob
6 to enter the time
span after which the appliance should
automatically switch off following the last
drink preparation.
A time between 5 minutes and 8 hours can
be set.
Cup warm. off in
(depending on the model)
Here you can set the time span after which
the cup warmer
27 switches off again
automatically.
● Set the required time by turning the rotary
knob
6.
Contrast
The display
5 contrast can be set from
–10
to
+10
. The factory setting is
+0
.
● Turn the rotary knob
6 to select the
required setting.
Water hardness
● Turn the rotary knob
6 to select the
required water hardness
1, 2, 3
or
4
.
Info: It is important to set the water hard-
ness correctly, so that the appliance indi-
cates accurately when the descaling pro-
gramme should be run. The factory setting
for the water hardness is
4
.
You can check the water hardness using
the enclosed test strip or by asking your
local water supplier.
● Dip the test strip briefly in water and
check the result after one minute.
Level Water hardness
German (°dH) French (°fH)
1
2
3
4
1-7
8-14
15-21
22-30
1-13
14-25
26-38
39-54