Before using for the first time – Siemens TE806501DE User Manual
Page 36
32
en
Before using for the
first time
General
Fill the appropriate container using only
pure, cold, uncarbonated water and only
roasted beans (preferably espresso or cof-
fee bean blends for fully automatic coffee
machines). Do not use coffee beans that
have been glazed, caramelised or treated
with other additives containing sugar, since
they will block the brewing unit.
The water hardness setting can be adjusted
on this appliance. The factory setting for the
water hardness is 4. Check the hardness
of the water you use with the enclosed test
strip. If a value other than water hardness 4
is displayed, change the setting on the
appliance accordingly after switching on
(see “Menu settings –
Water hardness
”).
Setting up the appliance
● Place the fully automatic espresso
machine on a flat, waterresistant surface
that can take its weight.
Important: Only use the appliance in
frost-free rooms. If the appliance has been
transported or stored at temperatures below
0 °C, wait at least 3 hours before operation.
● Pull out the mains plug from the cable
compartment
24 and plug it in. Adjust the
length of the cable by pushing it back in
and pulling it out. To do this, place the
appliance with its back flush with the edge
of the work surface and either pull the
cable
downwards or push it upwards.
● Lift the lid of the water tank
12.
● Remove and rinse the water tank
11 and
fill it with fresh, cold water. Do not fill
above the “
max” mark.
● Replace the water tank
11 and push it
firmly downwards into place.
● Close the water tank lid
12 again.
● Fill the bean container
15 with coffee
beans.
● Press the power switch
1 O / I. The start
button
8 lights up and the different lan-
guages appear in the display
5.
The following languages can be selected:
TE8.. DE
Deutsch English
Français Italiano
TE8.. RW
English Русский
Nederlands Français
Italiano Svenska
Español Polski
Українська Magyar
Türkçe Dansk
Norsk Suomi
Português
Čeština
Ελληνικa
● Use the buttons
<
and
>
4 to select the
language in which you want the display
texts to appear.
Sprache
Deutsch
start
English
Français
The selected language is highlighted.
● Press the
start button 8. The language
you selected is saved.
● The brand logo lights up in the display
5.
The appliance now heats up and rinses.
Some water will run out of the coffee
outlet
9.