Siemens TE806501DE - Manual (Page 37)

33
en
● The appliance is ready for use when the
symbols for the drink selection and the
start button 8 light up in the display 5.
Espresso
ЛЛ Н
В Г А Б Е Ж
Info: The factory settings of the fully auto-
matic espresso machine are programmed for
optimal performance. The appliance switches
off automatically after a specific time (see
“Menu settings – Auto Off after ”).
Note: If the appliance is being used for the
first time, the service programme has been
run, or the appliance has not been oper-
ated for a long period, the first beverage will
not have the full aroma and should not be
consumed.
When the fully automatic espresso machine
is first used, you will achieve a suitably thick
and stable “crema” only after the first few
cups have been dispensed.
Controls
Power on/off switch O / I
The power on/off switch 1 O / I is used
to switch the appliance on or off. The
appliance rinses automatically when it is
switched on and off.
The appliance will not rinse if:
● it is still warm when switched on.
● there was no coffee drawn before
switching off.
The appliance is ready for use when the
symbols for the drink selection and the start
button 8 light up in the display 5.
Customising button á
The appliance provides the option of saving
and calling up customised settings for
coffee drinks. Please refer to the section
“ Customising” for information on how to
save and call up these settings.
Service programmes button à
Press the à button 3 briefly to call up the
selection of service programmes. Please
run the programme as described in “Service
Programmes”.
Press and hold to activate or deactivate the
child-proof lock, see “Child-proof lock”.
Rotary knob
Turn the rotary knob 6 to the left or right to
navigate through the display 5, or to adjust
parameters in the menu.
Selection buttons < and >
Press the selection buttons 4 < and > to
navigate up and down through the menu
levels (navigation line 5c).