Controls – Siemens TE809F01DE User Manual
Page 37
33
en
Note: If the appliance is being used for the
first time, the service programme has been
run, or the appliance has not been oper-
ated for a long period, the first beverage will
not have the full aroma and should not be
consumed.
When the fully automatic espresso machine
is first used, you will achieve a suitably thick
and stable “crema” only after the first few
cups have been dispensed.
Controls
Power on/off switch O / I
The power on/off switch
1 O / I is used
to switch the appliance on or off. The
appliance rinses automatically when it is
switched on and off.
The appliance will not rinse if:
● it is still warm when switched on.
● there was no coffee drawn before switch-
ing off.
The appliance is ready for use when the
symbols for the drink selection and the
start
button
8 light up in the display 5.
Customising button
á
The appliance provides the option of saving
and calling up customised settings for
coffee drinks. Please refer to the section
“ Customising” for information on how to
save and call up these settings.
Service programmes button
à
Press the
à
button
3 briefly to call up the
selection of service programmes. Please
run the programme as described in “Service
Programmes”.
Press and hold to activate or deactivate the
child-proof lock, see “Child-proof lock”.
Rotary knob
Turn the rotary knob
6 to the left or right to
navigate through the display
5, or to adjust
parameters in the menu.
Selection buttons
<
and
>
Press the selection buttons
4
<
and
>
to
navigate up and down through the menu
levels (navigation line
5c).
Display
The display
5 uses symbols to indicate
the selection options, coffee strength and
per-cup quantity, and uses text to indicate
settings, ongoing processes and messages.
The rotary knob
6 and selection buttons
4 can be used to change settings. The
selected setting is highlighted by a frame.
Espresso
5a
5b
5c
Example:
The status line
5a shows the name of the
type of drink, along with the strength setting
55
and per-cup quantity
�
.
The selection line
5b shows symbols for
drink selection.
The arrows in the navigation line
5c indicate
the direction in which more menu levels can
be found.
Please refer to “Displays” for more detailed
information.
Start button
Press the
start button 8 to begin drink prep-
aration or to start a service programme.
Press the
start button 8 again during drink
preparation to stop the dispensing process
prematurely.