Siemens TS45359 - Manual (Page 17)

17
SIEMENS
ENGLISH
How to use the steam
station
1. When the steam station is plugged in and main
power button set to the “on” position (button
illuminated), the display (8) lights up and shows
all icons for 2 seconds.
2. After that time, the appliance shifts automatically
to the “i-Temp” setting. The icon will flash until the
temperature and steam settings are reached.
3. Temperature settings:
Temperature level selection tactile icon
is used to change the temperature of the
iron soleplate.
Automatic temperature selection of the
iron soleplate. It is suitable for any type
of fabric which can be ironed.
Temperature setting for dark and delicate
fabrics. Reduces the risk of shiny marks.
Indicates that the selected ironing
temperature is suitable for silk and
synthetic fabrics.
Indicates that the selected ironing
temperature is suitable for wool.
Indicates that the selected ironing
temperature is suitable for cotton and
linen.
To change the temperature of the soleplate, touch
the icon on the display (8) repeatedly. The iron
runs through the following cycle:
4. Steam settings:
Steam level selection tactile icon is used
to change the amount of steam coming
out of the soleplate.
Low steam flow
Medium steam flow
High steam flow
When “i-Temp” and “antiShine” functions are
selected, it is not possible to change the steam
setting by pressing the icon. The steam amount
is automatically selected.
Only on settings it is possible to
change the steam amount.
To change the amount of steam manually, touch the
icon on the display (8) repeatedly. The steam
generator runs through the following cycle:
The selected icon flashes until the pressure
corresponding to each steam level is reached.
Steam is now ready to be released by pressing the
steam release buttons (13 or 14*).
5. Other indications:
Indicates (flashing) that the auto shut-off
system has been activated.
Indicates (flashing) that the water tank (1)
is empty and must be filled.
Indicates (flashing) that the boiler and the
filter (12) must be rinsed.
6. Beep activation/deactivation
You can activate or deactivate a beep which may be
heard when touching the icons on the display (8).
To do this, simply touch the and icons at the
same time for 3 seconds. After this time, a long beep
will be emitted indicating that the beep has been
activated or deactivated.