Matrix Orbital VK204-25 Legacy - Manual (Page 29)

Command Syntax Default Notes
Cursor left FE 4C
254 76
254 ’L’
Moves the cur-
sor one position
to the left. If the
cursor is already
at the beginning
of a line it will
move to the end
of the other line
Cursor right FE 4D
254 77
254 ’M’
Moves the cur-
sor one position
to the right. If the
cursor is already
at the end of a line
it will move to the
beginning of the
other line
7.5 Keypad Interface Commands
NOTE The letter "R" in the “Default” column indicates that this state can be saved to
nonvolatile memory with the “Remember” command.
Table 15: Keypad Interface Commands
Command Syntax Default Notes
Auto repeat mode on FE 7E [0x00|0x01]
254 126 [0|1]
254 ’~’ [0|1]
Off Applies to key-
pad only.0x00
= 200 ms type-
matic,0x01 =
key down/key up
codes sent.
Auto repeat mode off FE 60
254 96
254 ’‘’
Off Applies to keypad
only.
Matrix Orbital VK204-25 26