Matrix Orbital LK402-25 Legacy - Manual (Page 24)

Description This command will move the cursor forward one space. If this
command is sent when the cursor is at the bottom right position the
cursor will wrap back to the home position if line wrap is on. Sending
this command will not effect the text displayed on the module, however
any characters that are sent will over write the current characters that are
being displayed.
Remembered No
5.12 Underline Cursor On
Syntax Hexadecimal 0xFE 0x4A
Decimal 254 74
ASCII 254 “J”
Description This command will cause the LK402-25 to display an underline cursor
at the current text insertion point.
Remembered Yes
5.13 Underline Cursor Off
Syntax Hexadecimal 0xFE 0x4B
Decimal 254 75
ASCII 254 “K”
Description This command will turn the the underline cursor off.
Remembered Yes
5.14 Blinking Block Cursor On
Syntax Hexadecimal 0xFE 0x53
Decimal 254 83
ASCII 254 “S”
Description This command will cause the LK402-25 to display a block cursor at the
current text insertion point.
Remembered Yes
5.15 Blinking Block Cursor Off
Matrix Orbital LK402-25 20