Matrix Orbital GLK12232-25-SM Legacy - Manual (Page 22)

22
5.5.7 Set debounce time (254 85 [time])
[time] is in increments of 6554 microseconds.
This command sets the time between key press and key read. All key types with the exception of latched
piezo switches will “bounce” for a varying time, depending on their physical characteristics. The default
debounce time for the module is about 52 mS, which is adequate for most membrane keypads. This time
equates to a setting of 8 using this command as there is a debounce time resolution of 6554 microseconds.