Aalborg Totalizer - Manual (Page 6)

3
(d) SPECIFICATIONS
d.1 General Attributes
INPUT ANALOG RANGE: 5 to 10 VDC or 0 to 5 VDC jumper selectable.
POWER SUPPLY REQUIREMENTS:
12Vdc, 100mV Pk-Pk, less than 0.5 watts.
(OPTIONAL, require only for TOT-05).
POWER CONSUMPTION: 10 mA at 12 VDC, less than 0.125 watts.
ACCURACY: ±0.5% of full scale.
TEMPERATURE STABILITY: ±200 ppm/ F C in the range of 5 F C to 50 F C.
DISPLAY: 7 digit, 8-mm figure height.
READING BACKUP: 20 years lithium battery, no external power required.
RESET: Front panel push button momentary tact switch
(works only when Totalizer is connected to the power).
ALTITUDE: Up to 10,000 feet.
CONNECTION METHOD: Telephone modular plug.
d.2 CE Compliance
Any model Totalizer bearing a CE marking on it, is in compliance with
the below stated test standards currently accepted.
EMC Compliance with 89/336/EEC as amended;
Emission Standard: EN 55011:1991, Group 1, Class B
Immunity Standard: EN 55082-1:1992
Environmental (per IEC 664): Installation Level II; Pollution Degree II