Aalborg Totalizer User Manual

Page 12

(g) TROUBLE

SHOOTING

Your Totalizer was thoroughly checked at numerous quality control points dur-
ing and after manufacturing and assembly operations. It was calibrated in
accordance to conditions for a given.

It was carefully packed to prevent damage during shipment. Should you feel
that the instrument is not functioning properly please check for the following
common conditions first:

Are all cables connected correctly?

Is the power supply correctly selected according to requirements? When sev-
eral meters are used a power supply with appropriate current rating should
be selected.

Were the connector pinouts matched properly? When interchanging with
other manufacturers equipment, cables and connectors must be carefully
wired for correct.

For best results it is recommended that instruments are returned to the fac-
tory for servicing. See section a.3 for return procedures.

(h) TECHNICAL ASSISTANCE

Aalborg

7 Instruments will provide technical assistance over the phone to

qualified repair personnel. Please call our Technical Assistance at 845-770-
3000. Please have your Serial Number and Model Number ready when you
call.

CAUTION: Use of the TOTALIZER in a manner other than that
specified in this manual or in writing from Aalborg

7, may impair

the protection provided by the equipment.