Legacy Classic Furniture Nursery Crib Drawer 490-8910C - Manual (Page 4)

Assembly Instruction 490-8910 CRIB DRAWER
Page 4 of 5
6. Turn the whole unit back side up and insert the same Bolts (H) through the Bottom Side Panel (F) into the
Divider panel. Also, install the Caster (K) into the Bottom panel (F) with Wooden screw (L) using
Screwdriver. Tighten all connections. Assembly is complete. (See Fig 4)
7. Push the whole unit under Crib or Toddler Bed/Daybed. Assemble the Drawer stops (G) with Bolt (N) using
Hex Allen Wrench (M) to the back of the conversion kit rail / Crib rail (see Fig 5).This will prevent the Crib
drawer from rolling past the bed
Fig (3)
Fig (4)