Legacy Classic Furniture White Metal Bed Full 485-5004 888-4923C User Manual
Assembly instructions for youth metal beds, Caution, Assembly procedures
Assembly Instructions For Youth Metal Beds
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come
loose inside the carton during shipment.
Caution:
(1) These parts are cumbersome and heavy. This product can best be assembled with the assistance of one or more
persons in order to prevent personal injury and to insure parts are not damaged during the assembly process. If dirty, clean finished
parts with mild dishwashing liquid and water solution applied on damp cloth. Cloth should not be excessively wet. Polish finish with
soft cloth and an industry recognized furniture polish.
(2) To prevent damage to your floor or carpet, please check the bottom of each piece of furniture for stain residue and
rough surfaces and also check for staples or nails left after removing the packaging material. The manufacturer will not be held
responsible if preventative steps are not taken prior to installation.
Note: The bed should not be moved after it has been assembled without first disassembling the bedrails. Excessive movement
while the bedrails are locked into place may damage bedroom parts.
Assembly Procedures:
Step 1. Insert BOLT (2) through the hole which in the middle of the METAL PLATE and attach it to the CENTER SUPPORT LEG,
tighten it with ALLEN WRENCH(8).
Step2..On each rail,insert 4 BOLTS (1) through the BED RAIL and CENTER SUPPORT LEG, and then attach FLAT WASHER
(4), SPRING WASHER (6) and NUTS (3) to the BOLTS (1), tighten them with OPENING WRENCH (9) and
SCREWDRIVER (NOT PROVIDED).
Step 3. Attach the BED RAILS ASSEMBLY to the BED ENDS using ARC WASHER (5), SPRING WASHER (7) and BOLT
(2), tighten them with ALLEN WRENCH (8).
Screwdriver
Metal Plate
Center Support Leg
Bolts 1/4"
2PCS
Metal Plate
Bed Rail
Bed Rail
2
5
7
2
Bed Rail
1
8PCS
1
Hardware List
Bolts 5/16"
8PCS
8PCS
Flat Washer
4
3
Nuts
H
ea
db
ao
rd
Post
2
Cen
ter
Su
ppo
rt
Leg
8PCS
6
Arc Washer
5
8PCS
1PCS
9
Allen Wrench (bigger)
8
8PCS
7
Parts List
Opening Wrench
1PCS
4PCS
Footboard
1PCS
Bed Rails
1PCS
Headboard
1PCS
Center Support Leg
Special Instruction: During normal everyday use bolts and nuts may loosen up. They should be periodically inspected and
re-tightened to prevent damage to the furniture or cause injury. Always check to be sure all hardware on this list is attached and kept
tightened.
Assembly is now complete
.