Clary CMN2000IPA - Manual (Page 3)

Page 3
INTRODUCTION
The following text is a complete product description, operating guide and basic maintenance summary of
the C
LARY CMN Series Rackmount, digital continuous, uninterruptible power system (UPS). This UPS
provides a fully on-line sinewave, completely regenerated for typical non-linear loads.
The CMN2000IP(A) has an output rating of 2000VA. The unit can deliver up to 1680 watts for a thermal
environment less than or equal to 40 degrees Centigrade.
The only difference between the CMN2000IP and the CMN2000IPA is the chassis. The IP is the steel
version and the IPA is the aluminum version.
The CMN2000IPAL has an output rating of 2000VA. The unit can deliver up to 1400 watts. The
CMN2000IPAL uses a lower velocity fan.
The CMN2000IPAD has an output rating of 2000VA. The unit can deliver up to 1680 watts. The
CMN2000IPAD uses a dual speed option. When the unit is running in normal conditions(less than 85%
load, ambient under 25˚C, On AC input Power), the fans are running at low speed. When unit is running
on batteries, the fans are running at high speed.
This instruction manual is provided with this unit to enhance your understanding of the product and its
applications. Read this handbook carefully in the order it is presented prior to operating or servicing to
avoid harm or damage to you or the unit. The UPS may be referred to in the text as the CMN Series,
Rackmount, etc. Certain references may be made to specific model numbers, however, the basic
difference between models is the output power it can supply.
IMPORTANT SAFETY INSTRUCTIONS,
SAVE THESE INSTRUCTIONS
This manual contains important safety instructions that should be followed during installation and
maintenance of the UPS and batteries.
Always operate the unit within the guidelines and specifications presented to maximize this system's
efficiency and lifetime.