Wagner HT3500 - Manual (Page 2)

English
2
General Description
This heat gun is a quality power tool. Like any power tool, it can be dangerous when
misused. Read the following instructions carefully and follow all safety precautions. It is
the responsibility of the owner to use the heat gun properly.
Specifications
Housing: ............................Engineered high-impact corrosion and heat-resistant polymers
Wattage: ...............................................1500 watts on highest setting, 150 watts on lowest
Heat Output: ......Approximately 1350°F on highest setting, approximately 250°F on lowest
BTU: ..............................................................Approximately 5100 BTUs on highest setting
Weight: .............................................................................................................. 1.5 pounds
Uses
• Soften paint, caulking and putty for easier removal
• Soften adhesives to help remove floor tiles
• Bend plastic pipes
• Shrink tubing for electrical work
• Shrink plastic film for wrapping or weatherproofing
• Loosen rusted nuts, bolts and fittings
Touch pad
The electronic touch pad gives you a wide temperature range to choose from, depending
upon the type of project.
HIGH
LOW
1350
1250
1150
1050
950
850
750
650
550
450
350
250
POWER
COOL
HIGH
LOW
SELECT
Power
button
Temperature
selector
Select
button
Mode
indicator
Temperature
indicator (6)
IMPORTANT!
The temperature
indicators will light up
sequentially as you
increase the
temperature. The
lighted indicator
farthest to the right will
reflect the current
temperature setting.
Power button: Turns the heat gun ON and OFF
Select button: Determines the temperature range and fan speed of the heat
gun, or switches the heat tool into cool down mode.
Temperature selectors: Sets the temperature within the HIGH or LOW temperature
ranges
Mode indicator: Shows the temperature range in which you are operating
Temperature indicator: Shows the current heat output of the heat gun