Waterloo F1972 - Manual (Page 6)

6
Process:
• Square the cabinet and wrench tighten all the bolts.
• Ensure lock on Right Side Door is in the unlock position.
• Attach Right Side Door as shown, using (5)
#8 - 32 x 3/8" Pan Head Screw.
• Adjust door for optimum performance before tightening
screws.
• Attach Left Side Door in same manner.
Items Needed:
#8 - 32 x 3/8" Pan Head Screw (Qty: 10)
Left Door (1)
Right Door (1)
Figure 7
.750
.250
.750
.250
Process:
• Place the Magnet on the right door in the locations noted.
• Make sure the adhesive backing is facing towards the
cabinet.
• Close the door to double check the Magnets are in the
correct positions.
• Open the door and remove the protective covering over
the adhesive on the back of the magnet.
• Close the door and press firmly on the front of the door to
seat magnets.
• The magnets will now be attached to the cabinet shell in
the correct location.
Items Needed:
Magnet (Qty: 2)
0.75-in
(1.90cm)
0.25-in
(.64cm)
Screw
Right
Side
Door
Square unit
0.75-in
(1.90cm)
0.25-in
(.64cm)