Waterloo F1972 User Manual
Page 5

5
OPTION 1 - MOUNTING CABINET
Note: Option 1 is for hanging cabinet on trackwall only. If
hanging cabinet directly on the wall go to Option 2.
Process:
• Attach Top and Wall Bracket as shown using (4) 1/4-20
x 5/8" Carriage Bolt , (6) 1/4-20 x 3/4" Button Head
Screws, (4) 11/32" Washer and (10) 1/4-20 Serrated
Flange Nuts.
• Finger tighten.
Items Needed:
1/4-20 x 5/8" Carriage Bolt (Qty: 4)
1/4-20 x 3/4" Button Head Screw (Qty: 6)
11/32" Washer (Qty: 4)
1/4-20 Serrated Flange Nut (Qty: 10)
Top (Qty: 1)
Mounting Bracket (Qty: 1)
Figure 5.3
24-in
16-in
Top
Nut
Washer
Bolt
Mounting
Bracket
Nut
Screw
Figure 5.1
Figure 5.2
Washer
Nut
Bolt
Nut
Screw
OPTION 2 - MOUNTING CABINET
Note: Option 2 is for hanging cabinet directly on wall.
Holes are provided for studs on 16" and 24" centers.
Assembly shown for installation on 16" centers.
Process:
• Attach Top as shown using (4) 1/4-20 x 5/8" Carriage
Bolt , (6) 1/4-20 x 3/4" Button Head Screws, (4) 11/32"
Washer and (10) 1/4-20 Serrated Flange Nuts.
• Finger tighten.
Items Needed:
1/4-20 x 5/8" Carriage Bolt (Qty: 4)
1/4-20 x 3/4" Button Head Screw (Qty: 6)
11/32" Washer (Qty: 4)
1/4-20 Serrated Flange Nut (Qty: 10)
Top (Qty: 1)
Note: Holes in back of cabinet are spaced to allow
mounting on studs with 16" centers or 24" centers. Leave
outside holes open to mount to studs on 24" centers.
Leave inside holes open to mount to studs on 16" centers.