MagTek USB HID SURESWIPE & USB HID SWIPE READER - Manual (Page 10)

USB HID Swipe Reader
4
SPECIFICATIONS
Table 1-1 lists the specifications for the USB Swipe Reader. Figure 1-2 shows the dimensions
for the standard product.
Table 1-1. Specifications
Reference Standards ISO 7810 and ISO 7811/AAMVA*
Power Input 5V From USB bus
Recording Method Two-frequency coherent phase (F2F)
Message Format ASCII
Card Speed 3 to 60 ips (7.62 – 152.4 cm/s)
ELECTRICAL
Current
Normal Mode
Suspend Mode
15 mA
200 uA
MTBF 1.0 E06 Hrs based on Mil-217
MECHANICAL
Size
Length
Width
Height
3.94” (100.0mm)
1.28” (32.5mm)
1.23” (31.3mm)
Weight 4.5 oz. (127.57 g)
Cable length 6 ft. (1.8m)
Connector USB Type A plug
ENVIRONMENTAL
Temperature
Operating -40
o
C to 70
o
C (-40
o
F to 158
o
F)
Storage -40
o
C to 70
o
C (-40
o
F to 158
o
F)
Humidity
Operating 10% to 90% noncondensing
Storage 10% to 90% noncondensing
Altitude
Operating 0-10,000 ft. (0-3048 m.)
Storage 0-50,000 ft. (0-15240 m.)
* ISO (International Standards Organization) and AAMVA (American
Association of Motor Vehicle Administrators).