MagTek 43-MILLIMETER COMPATIBLE - Manual (Page 7)

1
SECTION 1. FEATURES AND SPECIFICATIONS
The 43-millimeter OEM Swipe Reader has a TTL level interface and is designed for use in retail,
access control, and time and attendance environments. This Reader is in compliance with
industry specifications, including ANSI/ISO Standards 7810, 7811-1 through -6, 7812, and 7813
The Reader can be customized. Bidirectional read capability is available.
CONFIGURATIONS
Configurations and part numbers are as follows:
Part Number Read Cable Length
21044001 Track 1 & 2 3.386" (86mm)
21044002 Track 2 & 3 3.386" (86mm)
21044003 Track 2 3.386" (86mm)
21044004 Track 1 & 2 8.661” (220mm)
SPECIFICATIONS
IEC:
Meets or Exceeds
Requirements for: IEC 1000-4-2 ESD (Electro Static Discharge)
IEC 1000-4-3 Radiated EMC Field (2X requirement)
IEC 1000-4-4 Electrical Fast Transient Burst requirement
(transmission on I/O cable)
Flammability Meets UL94V-0
Recording Method Two-Frequency Coherent Phase (F2F)
Speed Card speed through the unit may vary from:
2-125 ips at 75 bpi
2-60 ips at 210 bpi
Power Requirements Single Track: 2.7 to 5.5VDC at 1mA, typical
Dual Track: 2.7 to 5.5VDC at 2mA, typical
Output Signal Levels V
ol
= 0.4V at 2mA
V
oh
= V
cc
-0.5V at -2mA
Operating Temperature -30
o
C to 70
o
C
Operating Humidity 10% to 90% relative humidity
Life 300,000 passes Single Track
1,000,000 passes Dual Track
Dimensions Length: 1.693" (43mm)
Height: 0.902" (22.9mm)
Width: 0.866"
(22.0mm)
Cable Length: See configuration table above
Connector See Section 2, Connectors
REFERENCE DOCUMENT
I/O Interface for TTL Swipe Readers, Technical Reference Manual, P/N 99875148