MagTek MT-215232 RS-232 - Manual (Page 22)

MT-215232 Insertion Reader
16
No Card Read
The No Card Read is the response if the Host inquires (Esc I) and the buffer is empty.
USER DRIVER
STATUS
CARD SENSOR STATUS
End of Text
Character,
(03 Hex)
Optional.
Set SWA # 8
to ON
Carriage
Return
Character (OD Hex)
Optional. Set SWB #1
to ON.
ASCII “0” = No Card is in the Reader
ASCII “1” = Card present in the Reader
ASCII”0” = Drivers 1 and 2 OFF
ASCII”1” = Driver 1 ON
ASCII”2” = Driver 2 ON
ASCII”3” = Drivers 1 and 2 ON
Optional Set SWB #3 ON
Escape character, optional
(1B hex), set SWA #7 to ON
Start of Text Character, optional (02 hex),
Set SWA #6 to ON
Notes: 1. Optional characters are used to frame the data.
2. The optional Hex characters are shown with the parity bit as zero (“0”).
Figure 3-3. No Card Read