Acer 2200 Series - Manual (Page 79)

69
Eng
lis
h
•
If the disc is OK, the drive head might be dirty. Clean it using a
drive head cleaning kit.
The printer does not work.
Check the following:
•
Make sure that the printer is connected to a power outlet and it is
turned on.
•
Check that the cable is properly connected to the appropriate
ports on both the computer and the printer.
•
If you are using a printer connected to your computer's parallel
port, restart the computer. Windows needs to find the new
hardware and install the necessary drivers.
I want to set up my location to use the internal modem.
Follow these steps:
•
Click on Start, and then click on Control Panel.
•
Double-click on Phone and Modem Options.
• In the Dialing Rules tab, begin setting up your location.
Refer to Windows Help and Support for more information.
When the battery is 95-99% full, it won't charge to 100%
capacity.
To preserve the life of the battery, the system only lets you charge the
battery when its capacity falls below 95%. It is recommended that you
run down the battery, and then fully recharge it.