MagTek MODEL MT-85 - Manual (Page 7)

1
SECTION 1. FEATURES AND SPECIFICATIONS
The Model MT-85 Low Coercivity Encoder/Reader reads and encodes magnetic stripe cards that
comply with ANSI/ISO standards. The Encoder/Reader is compatible with PC computers or any
computer with an RS-232 interface serial port. The MT-85 encodes at low coercivity (LoCo),
which is the energy level of 300 Oersteds.
FEATURES
•
Reads and encodes magnetic stripes per ANSI/ISO standards
•
Capable of reading and encoding media per ANSI/ISO specifications such as tickets, cards,
badges, and passbooks
•
Programmable baud rate, parity, and block check character (BCC)
REQUIREMENTS
•
MT-85 Encoder
- P/N 15033001, Tracks 1,2,3
- P/N 15033002, Track 2 only
•
120 VAC power supply to 12V DC 500mA (P/N 64300072)
or
•
230 VAC power supply to 12V DC 500mA (P/N 64300073)
OPTIONAL
•
Encoder/Reader Demo Program - Windows 95 or Windows NT.
- 3.5" disks, P/N 30037389
- From Web site, Encoder/Reader Demo (P/N 99510004)
•
MTD (MagTek Device Drivers for Windows)
-CD (P/N 30037385)
-From Web site, MTD Drivers (P/N 99510013)
•
Adapter, 9- to 25-pin, P/N 78200017