MagTek Excella STX99875342 - Manual (Page 37)

Appendix A. Built-in Web Page
29
IP Source
• Select “RNDIS”, the default option, if the values will be provided by the PC to which Excella
STX is being connected to (i.e., the values on this page will be ignored). It is recommended
to run the “ExcellaUSBConfig” utility (See Appendix B) on the PC to set these values when
the “RNDIS” option is selected.
• Select the “Fixed” option if the values will be set manually using this page.
“Cancel Changes” Button
Click on this button to cancel the current settings being displayed on this page.
“Save Settings” Button
Click on this button to save the current settings to the Excella STX device.
Save/Restore Configuration Tab
Figure A-7. Save/Restore Configuration Tab