ConnectPRO Master-IT USB User Manual – Older model - Manual (Page 2)

2 11
q
OVERVIEW
The ConnectPRO  Master-IT UR-12, and UR-14 make up the UR-
Series USB KVM Switches. They are a combination of USB
keyboard/mouse/monitor (KVM) switch and USB peripherals sharing
device which are fully compatible with USB specification 1.1. With a
Master-IT USB KVM switch, you can easily operate either up to 2 (UR-
12) or up to 4 (UR-14) PCs, G3/G4 Macs, or iMacs from 1 USB
keyboard, 1 USB mouse, and 1 monitor saving you space, time,
equipment and money. Its peripheral sharing function enables you to
share two additional USB peripherals among the connected computers.
Installation is as easy as connecting USB patch cables to computers and
to the Master-IT USB KVM switch. Switching among connected
computers is simple; Computer switching is as easy as pressing a front
panel button. The built-in USB hub ensures smooth switching from one
computer to the other. The Master-IT USB KVM switch provides the
easiest way to manage multiple computers with USB interfaces and
share USB peripherals among all computers. No more tangled cables
and messy working environments; let the Master-IT USB KVM switch do
the computer switching for you.
q FEATURES
n Manage G3/G4 Macs, or iMacs from one USB keyboard, mouse and
monitor.
n Multiple computers share different USB peripherals.
n Front panel push buttons for easy computer selection.
n No drivers needed for keyboard and mouse operation.
n Support keyboard and mouse plug-n-play.
n High VGA resolution: 1600x1200@85Hz.
n Can be Linked to a ConnectPRO
 PR-Series switch as a slave
USB switch.
n Buzzer sound for port switching confirmation.
n Activate Auto Scan by front buttons pressing.
n Selectable Scan Time interval.
n USB ver 1.1 compliant.
n Support the latest DDC2B VGA monitor.
n USB self-powered operation.
q
UR-14P
The Master-IT USB model UR-14P has PS/2 console port connectors,
and USB PC port connectors.
The UR-14P will allow either USB or PS/2 computers to be controlled by
one PS/2 Keyboard, one PS/2 Mouse, one monitor. It can also be used a
the cascaded unit down from the PR-18 (8-Port) or PR-116 (16-Port).
q CABLE CONNECTIONS
Connect the PS/2 keyboard and PS/2 mouse to their console ports,
then connect each computer to an available PC port.
q PORT SELECTION / SWITCHING
To switch to a different computer then the one you are currently on,
just press the corresponding front panel button for the attached
computer, or press the Left CTRL key twice then press number of
the key which corresponds to the computer you want to switch to.
EXAMPLE:
CTRL + CTRL , then 2 will switch to port #2 to control that
computer.
q RESET
Simultaneously press the front panel #1& #2 buttons for 5 seconds.