Alliance Laundry Systems NX18BVXA7 - Manual (Page 19)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Maintenance
17 9001910
Monthly Preventive Maintenance
Checklist
Machine ____________________________
Operator ___________________________
Month
Checks
Observe All Safety Warnings!
Disconnect power to the machine before performing the monthly maintenance procedures.
1. Clean the AC drive box.
2. Belts
a. Check belts for uneven wear and frayed edges.
b. Verify that belts are properly aligned by checking pulley alignment.
3. Check out-of-balance switch probe’s position.
4. Clean drain pipe.
5. Remove back panel and check overflow hose and drain hose for leaks.
6. Clean inlet hose filter screen.
7. Check the supply dispenser hoses for leaks.
8. Use compressed air to clean lint from motor.
9. Clean interior of machine, both basket and shell, by wiping with a water-soaked
sponge or cloth.
10. Use compressed air to ensure that all electrical components are free of moisture and
dust.
11. Verify that insulation is intact on all external wiring and that all connections are
secure. If bare wire is evident, call a Service Technician.