Martin Sprocket & Gear Warning and Safety Reminders - Manual (Page 2)

CEMA Safety Labels
The CEMA safety labels shown below should be used on screw conveyors, drag conveyors, and bucket elevators.
Safety labels should be placed on inlets, discharges, troughs, covers, inspection doors & drive guards. See CEMA
Safety Label Placement Guidelines on CEMA Web Site: http://www.cemanet.org/safety/guidelines.html
PROMINENTLY DISPLAY
THESE
SAFETY LABELS
ON
INSTALLED EQUIPMENT
SEE OTHER SIDE FOR SAFETY REMINDERS
Note: Labels alone do not substitute for a thorough in-
plant safety training program centered on the hazards
associated with operating your installed equipment.
Contact CEMA or Your Equipment Manufacturer for
Replacement Labels
CONVEYOR EQUIPMENT MANUFACTURERS ASSOCIATION
6724 Lone Oak Blvd., Naples, Florida 34109
239-514-3441
Exposed screw and
moving parts can
cause severe injury
LOCK OUT POWER
before removing
cover or servicing
CVS930011
CHR930001
Exposed moving
parts can cause
severe injury
LOCK OUT POWER
before removing
guard
CHS991026
Walking or standing on
conveyor covers or
gratings can cause
severe injury
STAY OFF
Exposed conveyors
and moving parts
can cause severe
injury
LOCK OUT POWER
before removing
cover or servicing
CVS930010
Exposed buckets and
moving parts can
cause severe injury
LOCK OUT POWER
before removing
cover or servicing
CVS930012
WARNING
Exposed screw and
moving parts can
cause severe injury
LOCK OUT POWER
before removing
cover or servicing
CHR930011
CEMA Document: SC 2004-01