Microlab M 200 - Manual (Page 3)

Illustrations
15. Attachments - Do not use attachments not recommended by the product manufactures, as they
may cause hazards.
16. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The
product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only
with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any
mounting of the product should follow the manufacturer's instructions and should use a mounting
accessory recommended by the manufacturer.
17. Moving the product - A product and cart combination should be moved with care. Quick stops,
excessive force and uneven surfaces may cause the product and cart combination to overturn.
18. Unused periods - The power cord of the appliance should be unplugged from the outlet during
lightning storms or when the apparatus is left unused for a long period of time.
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Please remove the power plug form the main power source or wall power source when not in use.
When plugged in to a power source, the system is in standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and
rating. The correct fuse specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If
you do, the speaker may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the
power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product must
remain freely accessible at all times while the product is in use.
25. Try to install the product near a wall socket or extension cord and shall be easily accessible.
26. The highest environmental temperature suitable for this product is 40°C.
EN
3
Introduction
High quality 2.1 subwoofer speaker system for multimedia and personal computer uses.
Designed elegantly in black, and featuring powerful speaker drivers.
Using 2 satellites and an amplified subwoofer for full range sound performances.
Bass reflex technology within the subwoofer enhances deeper bass than regular speakers.
Ideal for desktop placement and connects to any media player or computer with 3.5mm stereo jack.
Includes a wired remote control for easy volume control and input/output connections.
Features
• Beautiful 2.1 subwoofer speakers with great sound for desk or table tops
• Enjoy clear and true audio sound
• Ideal companion for your media player or personal computer and notebook
• Deeper bass and excellent mid to high range audio production
• Wired remote control with unique rotary volume knob
• Earphones and additional audio input jacks on wired remote control
Packing list
You should find following items while unpacking:
Product connection and operation
Connections
1. Connect the left satellite to the L AUDIO OUTPUT port of the side panel on the subwoofer.
2. Connect the right satellite to the R AUDIO OUTPUT port of the side panel on the subwoofer,
3. Connect the green 3.5mm stereo plug from the wired remote control to the audio output socket of your
playback device such as your notebook, desktop, or Mp3.
4. Connect the mains cable to your AC power supply.
5. Optional listening options: Headphones or earphones - connect the headphones 3.5mm stereo plug to
the wired remote control’s 3.5mm stereo audio output socket.
Operation
1. Turn on the system power by depressing the power switch at the side panel of the subwoofer.
2. Start the playback on your media player.
3. Adjust the master volume on the wired remote control to your preferred level. Next turn the bass level
knob on the side panel to adjust the bass effects.
4. Using headphones or earphones will defeat the master volume of the system when the 3.5mm audio
output is connected. The audio signal is now output through the headphones.
EN
4
M200 Subwoofer 1 pc
M200 Satellite 2 pcs
Wired remote control 1 pc
User manual 1 pc
PC
Power supply:
AC120V~ 60Hz, or AC220V - 240V~50Hz
Right Satellite Left Satellite Subwoofer
Back view
1. Bass volume
2. Power switch
3. AC cable outlet
4. Audio output stereo out to
satellites
Remote control
1. Rotary volume control
2. 3.5 mm stereo audio input
3. 3.5 mm stereo earphones jack
Back view Remote control
4
1
2
3
2
1
3