Kenwood TS-590S - Manual (Page 19)

19
4.7. Windows Firewall Settings
With the host station PC, receiving connections from networks and the internet using the
ARHP-590 are blocked by the Windows firewall. When blocked, KNS operations are
disabled, so remove the block.
Reference:
Add the ARHP-590 to "exceptions" using the Windows firewall settings to release the
block.
4.8. Comprehensive Security Software Settings
If using comprehensive security software, it is necessary to adjust the settings so that
ARHP-590 and ARCP-590 communications are not blocked. Perform the settings with
reference to the user manual for the comprehensive security software used.
4.9. Setting the Host Station Wait Mode
Click the "Connections" button in the main window of the ARHP-590 on the host station.
The indicator will light yellow and the remote station will enter connection request wait
mode.
If the audio transmission is speech, set the VoIP software to standby mode.
4.10. Connecting to the Host Station from the Remote Station
Click the "Connections" button in the main window of the ARCP-590 on the remote station.
If the connection to the host station is successful, the indicator will light green.
If the audio transmission is speech, connect the host station with the VoIP software too.