Kenwood DNX9280BT - Manual (Page 8)

8 | Quick Start Guide
Basic Operation
When you press or hold the
following button(s)...
Button General operation
SRC Turns the power On.
Displays the Source Control screen.
1 sec. Turns the power Off.
5 / ∞ Volume adjustment.
Holding down a key turns up the volume in series up
to 25. For more than 25, pressing the key turns up the
volume one by one.
ATT Attenuation of the volume On/Off.
1 sec. Switches the source that is output at the AV
OUTPUT terminal.
AUD Displays Graphic Equalizer screen.
1 sec. Turns the display Off.
NAV Displays the navigation screen.
1 sec. While watching the navigation screen
Picture in Picture function On/Off.
TEL Displays the Hands Free Control screen.
1 sec. While watching the Source Control screen
Secondary window function On/Off.
1 sec. While watching the navigation screen
Displays the Screen Control screen.
1 sec. While watching the playback screen of a
visual source
Displays the Easy Control screen.
Notes
You can adjust the sensitivity of the
buttons (touch sensors) on the front panel.
1. Touch [
] on common menu bar.
2. Touch [System] > [User Interface].
3. The [Panel Switch Sensitivity] item
allows you to set the sensitivity.
How to Display the Source Control
Screen
Press [SRC] to display the Source Control
screen.
In case of visual sources, the playback
screen is first displayed and changed to
the source control screen by pressing the
button again.
How to Display Top Menu Screen
Press [SRC] to display the Source Control
screen. When a video screen is displayed,
press [SRC].
Touch [Menu] on Source Control screen.
B59-2042-00_00_Q-E.indb 8 B59-2042-00_00_Q-E.indb 8 11/01/06 9:42 11/01/06 9:42