Connecting wires to terminals – Kenwood DNX9280BT User Manual

Page 26

| Quick Start Guide

Connecting Wires to Terminals

Connector Function Guide

Pin Numbers for
ISO Connectors

Cable Colour Functions

External Power

Connector

A-4

Yellow

Battery

A-5

Blue/White

Power Control

A-6

Orange/White Dimmer

A-7

Red

Ignition (ACC)

A-8

Black

Earth (Ground)

Connection

Speaker

Connector

B-1

Purple

Rear Right (+)

B-2

Purple/Black

Rear Right (–)

B-3

Gray

Front Right (+)

B-4

Gray/Black

Front Right (–)

B-5

White

Front Left (+)

B-6

White/Black

Front Left (–)

B-7

Green

Rear Left (+)

B-8

Green/Black

Rear Left (–)

⁄

Speaker Impedance

: 4 – 8 Ω

2WARNING
Connecting the ISO Connector

The pin arrangement for the ISO connectors

depends on the type of vehicle you drive. Make sure

to make the proper connections to prevent damage

to the unit.

The default connection for the wiring harness is

described in 1 below. If the ISO connector pins

are set as described in 2, make the connection as

illustrated.

Please be sure to reconnect the cable as shown

2 below to install this unit to the Volkswagen

vehicles etc.

1 (Default setting) The A-7 pin (red) of the

vehicle’s ISO connector is linked with

the ignition, and the A-4 pin (yellow) is

connected to the constant power supply.

Unit

Vehicle

Red (A-7 Pin)

Yellow (A-4 Pin)

Red (Ignition cable)

Yellow (Battery cable)

2 The A-7 pin (red) of the vehicle’s ISO

connector is connected to the constant

power supply, and the A-4 pin (yellow) is

linked to the ignition.