beautypg.com

Adjustment according to the playing source, Speaker level adjustment, Input level adjustment – Kenwood KRF-V6300D-S User Manual

Page 40: Adjusting the sound

background image

40

KRF-V6300D

Adjustment according to the
playing source

The audio can be adjusted as desired according to the source
being played.

MULTI CONTROL SOUND

MULTI CONTROL
O/

SOUND

SPEAKERS A/B/OFF

œ Press [SOUND] until the desired item appears on

the display.

Each time you press the key, the menu changes as
follows. Note that some items are not displayed
depending on speaker settings and listen mode.

Display

Adjustment

Range

"C"

Center speaker level

-10 – +10dB

*

1

"RS"

Surround right speaker level

-10 – +10dB

"RB"*

Surround Back right speaker level

-10 – +10dB

"BS"*

Surround Back speaker level

-10 – +10dB

"LB"*

Surround Back left speaker level

-10 – +10dB

"LS"

Surround left speaker level

-10 – +10dB

"SW"

Subwoofer level

-10 – +10dB

"INPUT"

Input level

-6, -3, 0

*

2

"NIGHT"

Midnight mode

"ON", "OFF"

*

3

"PANORAMA"

Panorama mode

"ON", "OFF"

*

4

"DIMENSION"

Dimension

"CENTER WIDTH"

Center width

Input source name Exit the adjustment mode.

* "RB" and "LB" can be selected when "BS L/R" is selected in

the speaker setup. "BS" can be selected when "BS MONO" is
selected in the speaker setup.

*

1

The adjustment is only temporary for the current input

selection. The value will return automatically to the original
setup value when the power is turned on/off or when the
input selection is changed.

*

2

Analog mode only

*

3

Dolby Digital and DTS mode only

*

4

Pro Logic II Music mode and Pro Logic IIx Music mode only

Use the [MULTI CONTROL

/5] to adjust the

setting as desired.

For detailed adjustment method, see the explanation of
each item.

To exit the sound adjustment mode

Press [SOUND].

Speaker level adjustment

Speaker level adjustment

The output level from the desired speaker channels can be fine
adjusted according to the properties of each disc.
The adjustment is only temporary for the current input selection.
The value will return automatically to the original setup value
when the power is turned on/off or when the input selection is
changed.

œ Press [SOUND] repeatedly until the speaker to be

adjusted ("C", "RS", "RB", "BS", LB", "LS", or "SW")
appears on the display.

Use the [MULTI CONTROL

/5] to adjust the level.

é Repeat steps 1 and 2 to adjust the level of other

speakers.

Input level adjustment

Input level adjustment

¶ Analog source only

If the input level of an analog source signal is too high, the CLIP
indicator will blink to indicate. Adjust the input level.

œ Press [SOUND] repeatedly until "INPUT" appears

on the display.

Use the [MULTI CONTROL

/5] to adjust the level.

Adjusting the sound

B60-5772-00_00_EN.indd 40

B60-5772-00_00_EN.indd 40

08.7.24 1:29:50 PM

08.7.24 1:29:50 PM

This manual is related to the following products: