Asante Technologies FS4008E/FS4016E - Manual (Page 16)

Installation
Page 2-6
Voltage Requirements
Check the AC power line voltage used in your area. T h e AC power adapter
included with the F S 4 0 0 2 E a n d F S 4 0 0 4 E Switches must match the
utility power.
The FS4008E and FS4016E are equipped with an internal power supply. Power
sensing is automatic for all international utility power. There is no power switch
on either of these units, they are powered on when the power cord is connected
between the Switch and the power outlet.
Mounting Configurations
This section describes how to mount the Switch on a desktop or a wall. It also
explains how to install the Switch in an equipment rack.
Desktop Mounting
To mount the Switch on a desktop or shelf:
1
Attach the four rubber feet (supplied) to the bottom of
each corner on the Switch. See Figure 2-9.
Figure 2-9 Desktop mounting
2
Place the Switch on a flat, stable, horizontal desktop or
shelf.
Make sure you allow enough ventilation space between the
Switch and surrounding objects.
The Switch is ready for network connections.
FS4008E
FriendlyNet
8-port 10/100 Fast Ethernet Switch
Uplink
or
Power
Switched 10/100Mbps P orts
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8