Asante Technologies FS4008E/FS4016E - Manual (Page 13)

Components
Page 2-3
Figure 2-2 FriendlyNet FS4002E back panel
◆ Note: The FS4002E does not have a power switch. The
FS4002E is automatically powered on as soon as the power
cord is connected between the FS4002E and a power outlet.
FS4004E
The front panel of the FS4004E contains four 10/100 Mbps ports, one uplink
switch button, and LED indicators. See Figure 2-3.
Figure 2-3 FriendlyNet FS4004E front panel
The back panel of the FS4004E contains a 12Vdc power connector, which uses
a 115Vac receptacle-mount (or “brick”) type dc power supply. It also contains a
ports switch consisting of four DIP switches. The DIP switches set the mode of
operation for each port, either half-duplex or full NWay. See Figure 2-4.
Figure 2-4 FriendlyNet FS4004E back panel
12V DC
1 2 N/A N/A
Power Connector Port DIP Switches
FS4004E FriendlyNet
4-port 10/100 Fast Ethernet Switch
Uplink
or
Power
10/100Mbps Ports
1 2 3 4 1 2 3 4
Uplink Port (Selector)
LEDs Four 10/100 Ports
12Vdc
1 2 3 4
Port DIP Switches Power Connector