Kenwood TK-8302E - Manual (Page 14)

9
FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION
FleetSync is an Alphanumeric 2-way Paging Function and is a protocol owned by
Kenwood Corporation.
S
elcAll
(S
electiVe
c
Alling
)
A Selcall is a voice call to a particular station or to a group of stations.
n
Transmitting
1 Select your desired zone and channel.
2 Press the microphone PTT switch and begin your conversation.
n Receiving
If enabled by your dealer, an alert tone will sound and the LED will blink when
a Selcall has been received.
To respond to the call, press the PTT switch and speak into the microphone.
n Identification Codes
An ID code is a combination of a 3-digit Fleet number and a 4-digit ID number.
Each transceiver must have its own Fleet and ID number.
Note: The ID range may be limited by programming.
p
Aging
c
All
1 Select your desired zone and channel.
2 Press and hold the key programmed as Paging Call for second to transmit
your PTT List ID, to request a call.
S
tAtuS
m
eSSAge
You can transmit pre-programmed status messages by pressing the keys
programmed as Status 1 and Status 2.
Status messages are 2-digit codes ranging from 0 to 99 (0 ~ 99 are reserved
for special messages).
• “dt” appears on the display when sending a status message. “Ed” appears on the
display when receiving an acknowledgement. “Er” appears on the display during status
message no reply.
gpS r
eport
If a GPS unit (NMEA-03 format) is installed on your transceiver, you can press
the key programmed as Send the GPS data to send your location data.