Kenwood DNX5280BT - Manual (Page 13)

13
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT
Detaching The Front Panel
You can detach the front panel to prevent theft.
Press the < 0> button for 3 seconds
to open the front panel.
Then, detach the panel as the
diagrams below.
2
3
1
4
NOTE
• The attaching plate closes automatically
in about 10 seconds after the front panel
is released. Remove the panel before this
happens.
• It closes automatically when no operation is
done for about a minute.
Detach the panel as the diagram
below.
● After detaching:
Put the panel in the protective bag
supplied with the unit.
NOTE
• To prevent deterioration, do not touch the
terminals of the unit and faceplate with
your fingers.
• If the terminals on the unit or faceplate get
dirty, wipe them with a clean soft dry cloth.
• For attaching the panel, see Attaching the
front panel (P.25).
B59-2048-00_00_DNX7_E_en.indd 13 10/12/16 12:11