A&D Ej Series Compact Balance EJ-2000 - Manual (Page 28)

26
9-3. EJ-07 / EJ-08 Underhook
By attaching the underhook to the bottom of the balance, large objects that are difficult
to load on the weighing pan can be weighed, and the density (specific gravity) of
objects may be measured. Refer to the “9-6. EJ-13 Density Determination Kit” for the
information about the density measurement.
‰ EJ-07 is for use with the EJ-3000 / EJ-4100 / EJ-6100.
‰ EJ-08 is for use with the EJ-1500 / EJ-2000.
‰ The calibration with a weight being hung on the hook is required for
an accurate weighing.
EJ-07 / EJ-08 Installation
Open the cap on the bottom of the
balance, and screw the underhook
into the mounting hole.
Caution
‰ Do not apply excessive force to the underhook.
‰ When not in use, remove the underhook and attach the cap to prevent dust
from getting into the balance.
9-4. EJ-11 Breeze break
EJ-11 will be used mainly for min. display 0.01 g models. But all of EJ series can use
this option unit.
‰
Remove the fixing frame out.
‰ Attach the breeze break frame instead of
the fixing frame.
‰ Attach the breeze break to the balance.
9-5. EJ-12 Carrying case
EJ-12 is available for the convenience of carrying the balance by hand. However, note
that because these balances are precision equipment, they will not be able to
withstand excessive shock, such as being dropped.
EJ-07 EJ-08
Remove
the cap.
Fixing frame
Breeze break frame
Breeze break