Kenwood M-616DV-W - Manual (Page 23)

English
23
Playing an external component
An external component can be connected to AUX IN
of this unit and played back.
1
Connect an external component.
Connect an external component to the [AUX IN]
connector on the front of this unit.
2
For Remote control unit: Press TUNER/AUX to
select "A-IN."
For Main unit: Press INPUT SELECTOR button to
select "A-IN."
3
Start playing the connected external
component.
⁄
• Music or sound on the connected external component
cannot be output through the AUDIO OUT terminals on this
unit.
Using the AUX Using the radio
Tuning in radio stations
1 For Remote control unit: Press TUNER/AUX to
select "TUNER."
For Main unit: Press INPUT SELECTOR button to
select "TUNER."
2
For Remote control unit: Press and hold MULTI
CONTROL 5 or ∞ button to tune in to the
desired frequency.
For Main unit: Press and hold TUNING
5 or ∞
button to tune in to the desired frequency.
⁄
• To tune to a weak station, press TUNING 5 or ∞ button on
the main unit repeatedly until the display shows the desired
frequency or when the best reception has been obtained.
• Broadcasts cannot be output through the AUDIO OUT
terminals on this unit.
STEREO/MONO
Press FM MODE/PLAY MODE button to select mono
or stereo mode.
When stereo mode is selected, "FM ST" appears on
the display.
Continued to next page
M616DV_12th.indd 23 M616DV_12th.indd 23 11.7.6 0:05:41 PM 11.7.6 0:05:41 PM