Kenwood M-616DV-W - Manual (Page 21)

English
21
Menu Item Contents
TV SYSTEM You can select the TV system (PAL,
NTSC or AUTO).
SCREEN SAVER You can set the screen saver function
(ON or OFF). If no operation is done
for about 3 minutes, starts the screen
saver.
VIDEO You can select the VIDEO system
(INTERLACE or P-SCAN YPBPR).
TV TYPE 4:3 PS (Pan Scan conversion): Select
when a standard 4:3 TV is connected.
Automatically displays the wide
picture on the entire screen and cuts
off the portions that do not fit.
4:3 LB (Letter Box conversion): Select
when a standard 4:3 TV is connected.
Displays a wide picture with bands
on the upper and lower portions of
the screen.
16:9 (Wide-screen television): Select
when a 16:9 wide TV is connected.
PASSWORD You can prohibit operations used for
changing the RATING setup. Enter a 4
digit password. We recommend that
you write your password here for your
reminder.
Password:
If you forget your password, you can
release it by entering 0000.
RATING You can set playable rating level with
the System.
DEFAULT You can set all the items on the SETUP
menu to the initial settings (except for
the PASSWORD setting).
OSD
LANGUAGE You can select the language displayed
on the screen.
ENGLISH, GERMAN, SPANISH,
FRENCH, PORTUGUESE
MENU LANG You can select the initial menu
language for DVD Video.
ENGLISH, GERMAN, SPANISH,
FRENCH, PORTUGUESE
DIVX [R] VOD The System has its own Registration
Code.
If necessary, you can confirm it.
Once you have played back a DivX
file in which the Registration Code is
recorded, the System’s Registration
Code is overwritten for copyright
protection.
DOWNMIX LT/RT: Outputs the sound mixed to
the Dolby Surround audio.
STEREO: Outputs the sound mixed to
the stereo sound.
AUDIO OUT SPDIF/OFF: Digital output is disabled.
SPDIF/RAW: Select this when
connecting an amplifier or a decoder
compatible with Dolby Digital.
SPDIF/PCM: Select this when
connecting an amplifier or a decoder
incompatible with Dolby Digital or
MPEG Audio, or when connecting to a
recording device.
BRIGHTNESS You can adjust the brightness. (0 to
12)
CONTRAST You can adjust the contrast. (0 to 12)
HUE You can adjust the hue. (–6 to +6)
SATURATION You can adjust the color depth. (0
to 12)
SHARPNESS You can adjust the sharpness. (0 to 8)
NIGHT MODE You can set the sound to reduces the
intensity of loud sounds and raises the
level of very soft sounds. (ON or OFF).
DYNAMIC
RANGE You can select the Dynamic Range
Compression (DRC) for night-time
listening. DRC reduces the difference
between normal voices and the sound
(such as the sound of explosion).
The effect of DRC is as follows.
FULL > 6/8 > 4/8 > 2/8 > OFF
When "OFF" is selected, the effect is
not available.
M616DV_12th.indd 21 M616DV_12th.indd 21 11.7.6 0:05:39 PM 11.7.6 0:05:39 PM